Control Room server requirements

The Control Room is deployed on servers in data centers. The minimum Automation Anywhere hardware requirements include server type, machine type, processor, RAM, disk storage, and network requirements.

Note: Automation Anywhere does not provide any monitoring functions for repository, such disk space usage, memory, or other alert mechanisms related to repository. There are commercial tools available from other third-party independent software vendors (ISV) who provide such tools.

The installation wizard requires the following:

IP addresses: Identify all the nodes (servers) IP addresses in the data center cluster before installation. You provide these IP addresses during Control Room installation.
Access hardware: To enable viewing the Automation Anywhere interface, provide:
- keyboard
- mouse or other pointing device
- monitor with 1366 x 768 or higher resolution

Note: For IQ Bot server requirements, see IQ Bot hardware and software requirements .

Control Room must be installed on a 64-bit, server-level machine, and there can only be one instance of it on the machine. All previous Control Room versions must first be removed from the server machine before you begin the installation.

The following are server requirements for Windows and Linux.


Component server	Processor	RAM	Storage (free disk space)	Network
Control Room Servers	8 core Intel Xeon Processor or equivalent 64-bit Processor with 2.5 GHz plus speed	16 GB	500 GB	1 GbE IPv4 IPv6

Memory utilization: A Control Room configured with the recommended 16 GB RAM utilizes 80 to 90 percent memory in idle condition and up to 95 percent memory under load, for example, concurrent bot deployments.

Tip: We recommend that you configure the Control Room network bandwidth to be above 1 GbE for all inter-cluster communication between or among the following:

Control Room and database
All Control Room nodes
Control Room and Elasticsearch nodes
Control Room and storage systems
Database nodes for high availability (HA) and disaster recovery (DR) configuration

Automation 360