家

免費獲取社群版 
登入
閱讀及檢閱 Automation Anywhere 文件

Automation 360

關閉內容

內容

開啟內容

Control Room smart card first administrator

  • 已更新：2022/03/22
    • Automation 360 v.x
    • 安裝
    • RPA 工作區

Control Room smart card first administrator

After configuring the smart card authentication process, an administrator user is needed. This process will walk you through setting up the first administrator for the Control Room.

先決條件

要執行此任務，您必須是 Control Room 管理員並擁有所需的權限和權限。

When authenticating with smart cards, the authenticating system will send a signal to the operating system to "Insert Smart Card" and prompt the user, from the smart card software, to select the certificate to use for authentication.

The following steps guide you through setting up your first administrator user with smart card authentication installed.

You should be on the correct configuration page if you have completed 配置智能卡身份驗證安裝過程.

程序

  1. Navigate to > Control Room first administrator.
  2. Insert the smart card for the administrator.
  3. Click Authenticate and pre-fill user data.
    This will start the smart card authentication process and pre-fill data from the selected certificate base on the mappings defined during the configuration of the Certificate (smart card) authentication installation process. If any information requires correction, click the Back button and make the necessary changes.
  4. Verify the data.
    View the Username, First Name, Last Name, and Email Address that is pre-filled and verify that these data points were correctly mapped during the smart card authentication installation procedure.
  5. Click Save and log in
    The configuration of Certificate (smart card) authentication strategy is complete.
After configuration of the smart card authentication process, the login page of the Control Room will display only the "Insert CAC/PIV" option for authenticating the user. Pressing this button will start the smart card authentication process and the browser will signal a smart card login request to the operating system which will then prompt the user to insert their smart card and possibly an optional PIN.

The user selects the appropriate certificate on the smart card and proceeds with the Control Room login.

傳送意見反饋